-
We provide high-quality machines and solutions for recycling Organic Waste .Our system design places profitability ahead of recovery rates. We provide solution for the bulk waste generators like Hotels , Temples, Hospitals, Clubs & Resorts, Housing societies, Municipal Corporations, Vegetable & Fruit Markets, Institutions etc. Compost and digestate from organic waste make for an ideal organic fertilizer for agricultural purposes, and also promote soil humus content stabilization or improvement that is suitable for agricultural and horticultural use. The organic waste processed at controlled aerobic digestion plants stems from the following sources: households, yards and parks waste, restaurant and canteen kitchens, food processing plants and agricultural residues. -
Features Ø Blades are made of high manganese high chrome steel. Ø Main electrical components are a combination of ABB/ Schneider/ or equivalent. Ø Microcomputer technology incorporating rotator speed variations with start, stop and reverse features. Ø Automatic reverse sensors to protect the machine against over loading and jamming. Ø Specifically designed rotor which is extremely wear resistant. Ø Rotor blade can be rotated 4 times before they need changing, lowering running costs and reducing machine down time Ø Extremely versatile machine able to process a number of different materials -
The A S TECHNO OXY-AIR MIXER is designed for a variety of applications in which oxygen transfer and mixing are required along with portability. This flexible, dependable aerator is best suited for deeper tanks up to depth of 8 Meters that optimize the aeration and mixing zones while increasing oxygen utilization. The deep tank also minimizes land requirements which in turn often reduces overall construction cost. Main aim to maximise the oxygen transfer rate and to reduce overall energy consumption, The OXY-AIR MIXER design places the aerator at the surface of the tank and creates distinct zones of influence by the thrust and churning effect. The Primary or mixing zone, has the highest rate of mixing effect. The Secondary, or oxygen transfer rate will be optimised because of the air travelling time beneath the surface of water is higher than that of diffusers and conventional surface aerators (approximately 1.6 times) providing energy for mixing and making optimal use of available oxygen. OXY-AIR MIXER/ Aerator are designed consist assembly which diffuse the air below the surface of water in the form of small air bubbles about 1.5 mm to 2.5 mm to increase the surface area in contact with water. Which results in maximum oxygen transfer efficiency not less than 1.5 to 2.0 kg O2/kW hr. INDIAN MADE The entire OXY-AIR / MIXER range is designed and manufactured wholly Within INDIA with local parts support. -
- IP67 waterproof, floats on water for easy retrieval
- Easy-to-use, gives fast and accurate readings
- LCD Display 3½ digit with annunciator
- Auto shut-off to conserve battery life
- Sturdy, minimal maintenance required
- Click-lock battery compartment – no tools required to change batteries
- Other features include hold function, automatic calibration
Product Specification Description Waterproof Yes pH Range 0.0 to 14.0 pH Resolution/Accuracy 0.1 pH / ± 0.1 pH Calibration 1 pt (4.01, 7.00 or 10.01) ATC N.A. Temp. Display N.A. Power Requirement 4 x 1.5 V ‘A76’ micro alkaline batteries Dimensions (L x W x H) Tester 16.3 x 4.5 x 3 cm Boxed 24.5 x 13.5 x 4.5 cm Weight Tester 90 g Boxed 137 g Ordering Information
Order No. Item ECOPHTEST1 Waterproof EcoTestr pH 1 Tester without ATC, 1 point Calibration pH Calibration Solutions
Order No. Item ECBU4BTC pH 4.01 buffer, 480 ml ECBU7BTC pH 7.00 buffer, 480 ml ECBU10BTC pH 10.01 buffer, 480 ml Download Brochure
• EcoTestr Series Family Brochure -
- IP67 waterproof, floats on water for easy retrieval
- Easy-to-use, gives fast and accurate readings
- LCD Display 3½ digit with annunciator
- Auto shut-off to conserve battery life
- Sturdy, minimal maintenance required
- Click-lock battery compartment – no tools required to change batteries
- Other features include hold function, automatic calibration
Product Description
Product Specification Description Waterproof Yes pH Range 0.0 to 14.0 pH Resolution/Accuracy 0.1 pH / ± 0.1 pH Calibration 3 pt (4.01, 7.00 or 10.01) ATC Yes Temp. Display N.A. Power Requirement 4 x 1.5 V ‘A76’ micro alkaline batteries Dimensions (L x W x H) Tester 16.3 x 4.5 x 3 cm Boxed 24.5 x 13.5 x 4.5 cm Weight Tester 90 g Boxed 137 g Ordering Information
Order No. Item ECOPHTEST2 Waterproof EcoTestr pH 2 Tester with ATC, 3 point Calibration pH Calibration Solutions
Order No. Item ECBU4BTC pH 4.01 buffer, 480 ml ECBU7BTC pH 7.00 buffer, 480 ml ECBU10BTC pH 10.01 buffer, 480 ml Download Brochure
• EcoTestr Series Family Brochure -
- Floats & meets waterproof IP67 rating
- Lanyard provision enables easy transport for on-the-go measurement
- Cap secures to the top of the tester when not in use
- Wide, stable base allows the tester to stand independently
- Large 4 digit double line display and wide viewing angle make it easy to read and record measurements
- Easy battery replacement – No special tools required
- Battery life, ready, and calibration indicators simplify measurement and pocket tester maintenance
- Easy to operate and intuitive user interface with power, calibration, menu and enter keys
- 3-point calibration allows the tester to accurately measure pH across the acid and alkali ranges
- One push calibration: Immerse sensor in calibration solution and press “Cal”
- Simultaneous display of temperature; user selectable 0C or 0F
- Automatic temperature compensation for greater accuracy
- Acrylonitrile Butadiene Styrene (ABS) plastic body is durable and chemically resistant
Product Description
Product Specification Description Measuring Parameter pH / °C /°F pH Range 0.0 to 14.00 pH Resolution/Relative Accuracy 0.1 pH / ± 0.1 pH Calibration 1 to 3 points Temperature Range 0 to 50.0 °C 32.0 to 122.0 °F Resolution/ Relative Accuracy 0.1 ºC / 0.1 °F / ± 0.5 ºC / ± 0.9 °F + 1 LSD Automatic Temp. Compensation Yes Auto Off 8.5 mins after last key press Operating Temp. 5 to 45 °C Ingress Protection IP67 rating; waterproof Power Includes (4) batteries (A76 or LR44 equivalent) Dimensions (L x W x H) 17 x 4.5 x 3 cm Ordering Information
Order No. Item EXPERTPH Waterproof Expert pH pocket tester with ATC and temperature display, 3 point Calibration, ± 0.1 pH accuracy pH Calibration Solutions
Order No. Item ECBU4BTC pH 4.01 buffer, 480 ml ECBU7BTC pH 7.00 buffer, 480 ml ECBU10BTC pH 10.01 buffer, 480 ml Download Brochure
• EXPERT pH Pocket Tester Brochure -
- IP67 protection
- Push button calibration
- The platinum band sensor offers a larger surface area of contact, diminishing the effects of contamination
- Auto-power off
- Self-diagnostic messages
- Large display screen for enhanced readability
- Important functions such as mode , battery level are displayed on LCD screen for convenience
- User replaceable double junction, polymer sensor
Product Description
Product Specification Description Waterproof Yes Range -999 mV to +1000 mV Resolution/Accuracy 1 mV / ± 2 mV Sensor Platinum band, double-junction LCD Display Custom Dual line Display Operating Temperature 0 – 50 °C Power Requirement 4 x 1.5 V “A 76” Alkaline Batteries Dimensions(L x W x H) Tester 16.5 x 3.8 cm Boxed 22 x 6 x 5 cm Weight Tester 90 g Boxed 170 g Ordering Information
Order No. Item ORPTEST10 Waterproof ORPTestr 10 Large Dual Display Tester (-999 to +1000 mV) ORPSENSORDJ Replacement Double Junction Sensor for ORPTestr 10 ORP Calibration Solutions
Order No. Item ECORPQUIN Quinhydrone 263 mV, 480 ml ECORPQUIN086 Quinhydrone 86 mV, 480 ml Download Brochure
• Waterproof Pocket Testers Family -
- IP67 protection
- Push button calibration
- Auto-power off
- Multi-electrode compatibility via BNC connector
- Self-diagnostic messages
- Large display screen for enhanced readability
- Important functions such as mode, battery level are displayed on LCD screen for convenience
Product Description
Product Specification Description Waterproof Yes Range -999 mV to +1000 mV Resolution/Accuracy 1 mV / ± 2 mV Sensor To be ordered separately LCD Display Custom Dual line Display Operating Temperature 0 – 50 °C Power Requirement 4 x 1.5 V “A 76” Alkaline Batteries Dimensions (L x W x H) Tester 16.5 x 3.8 cm Boxed 22 x 6 x 5 cm Weight Tester 90 g Boxed 170 g Ordering Information
Order No. Item ORPTEST10BNC Waterproof ORPTestr 10 Large Dual Display Tester; BNC connector sensor; (-999 to +1000 mV); (meter only – electrode to be ordered separately) ECFC7960101B General purpose plastic-body single junction gel-filled ORP Electrode, 12x90mm, BNC connector, 1m cable length ECFC7960201B General purpose plastic-body double junction gel-filled ORP Electrode, 12x90mm, BNC connector, 1m cable length ORP Calibration Solutions
Order No. Item ECORPQUIN Quinhydrone 263 mV, 480 ml ECORPQUIN086 Quinhydrone 86 mV, 480 ml Download Brochure
• Waterproof Pocket Testers Family -
- IP67-rated waterproof pH meter
- Large, three line LCD – View pH or mV measurement with temperature and % slope
- Built-in memory function – Stores up to 150 measurements along with Temperature
- Auto buffer recognition automatically identifies USA, NIST or DIN buffer sets for rapid calibration
- Power with AA batteries or use optional AC adapter for bench top measurements
- Calibration due alarm – Set a visible reminder when it is time to recalibrate the meter
- Selectable 0F / 0C – Choose units to best fit your application
- Features mV offset – Calibrate to a Redox/ORP standard or use for pH electrode diagnostics
- Ready indicator, manual or automatic measurement hold feature and optional automatic shutoff function
- % slope and temperature displayed with each measurement
- Built-in stand – Ideal for easy bench top or long-term use
- Wall-mount option – Ideal to save on bench space
- Includes innovative Grip-Clip™ – Quickly and easily secures the electrode to your beaker or container
- Compatible with pH electrodes having a BNC connector
Product Description
Product Specification Description pH Range -2.00 to 16.00 pH Resolution / Accuracy 0.01 pH / ± 0.01 pH pH Calibration Points Up to 5 points (USA & NIST) Up to 6 points (DIN) mV Range ± 2000 mV Resolution / Accuracy 0.1 mV ± 999.9 mV; 1 mV beyond / ± 0.2 mV +2 LSD or + 0.5 % of reading; whichever is greater mV Calibration Points ± 200 mV Temperature Range -10.0 to 110.0 ºC (14.0 to 230.0 ºF) Resolution / Accuracy 0.1 ºC / ºF / ± 0.5 ºC; ± 0.9 ºF Temperature Calibration Points Offset in 0.1 increments, ± 10 ºC or ± 18 ºF Display Three line custom LCD Temperature Compensation Automatic or manual from -10 to 110 ºC Memory Stores up to 150 data sets Power Two AA batteries (included), >700 hours continuous use; AC adapter (optional) Standard supply Meter with double-junction pH electrode ECFC7252201B and ATC probe, Grip-Clip™, two AA batteries, hard carry case, pH buffers, storage solution, rinse solution. ORP electrode to be ordered separately Dimensions (L x W x H) Meter 77/8” x 31/8” x 21/4” (20 x 8.3 x 5.7 cm) Boxed 91/8” x 91/8” x 23/4” (23 x 23 x 7 cm) Weight Meter 1 lb (0.5 kg) Boxed 1.4 lb (0.7 kg) Ordering Information
Order No. Item ECPHWP15002K Meter with double-junction pH electrode ECFC7252201B and ATC probe, Grip-Clip™, two AA batteries, hard carry case, pH buffers, storage solution, rinse solution 60X426401 Optional 100 / 240 VAC SMPS power adapter, 9 V, 6 W ECFC7960201B General purpose plastic-body double junction gel-filled ORP Electrode, 12x90mm, BNC connector, 1m cable length ECFC7960101B General purpose plastic-body single junction gel-filled ORP Electrode, 12x90mm, BNC connector, 1m cable length pH Calibration Solutions
Order No. Item ECBU1BT pH 1.68 buffer, 480 ml ECBU4BTC pH 4.01 buffer, 480 ml ECBU7BTC pH 7.00 buffer, 480 ml ECBU10BTC pH 10.01 buffer, 480 ml ECBU12BT pH 12.45 buffer, 480 ml EC-BU-6.86BT pH 6.86 buffer, 480 ml EC-BU-9.18BT pH 9.18 buffer, 480 ml ORP Calibration Solutions
Order No. Item ECORPQUIN Quinhydrone 263 mV, 480 ml ECORPQUIN086 Quinhydrone 86 mV, 480 ml Download Brochure
• Eutech 150 & 450 Series Family Brochure -
- Up to 6-point calibration with auto-buffer recognition
- Quick, easy electrode diagnosis with multiple pH slopes and offset display
- Non-volatile memory holds up to 500 data points – time and date-stamped for GLP compliance
- Calibrate with up to 5 custom pH buffers – use any pH values that are ≥1.0 pH unit apart
- Cal-due alarm – no more out-dated calibrations
- Auto-logging function for convenient continuous monitoring
- Password protection for setup and calibration
Product Description
Product Specification Description pH Range -2.000 to 20.000 pH Resolution/Accuracy 0.1 / 0.01/ 0.001 pH (selectable) /± 0.002 pH + 1 LSD mV Range ± 2000 mV Resolution/Accuracy 0.1 mV / ± 0.2 mV Temp.Range 0.0 to 100.0 ºC / 32.0 to 212.0 ºF Resolution/Accuracy 0.1 ºC (0.1 ºF) / ± 0.3 ºC (0.5 ºF) ATC Yes (0 to 100 ºC) No.of pH Calibration Points 6 points Buffer Sets USA, NIST, DIN, User 1, User 2, Custom Built-in Electrode Arm Yes GLP Yes Memory 500 data sets Output RS 232C (via cable) Electrode Included ECFG7370101B, Single junction glass pH electrode, ATC Probe (PH5TEMB01P). ORP electrode to be ordered separately Temp.Probe Included Power Requirements Included, 100 /240VAC SMPS Power Adapter , 9V,6W Dimensions (L x W x H) Meter 17.5 x 15.5 x 6.9 cm Boxed 30.8 x 23.5 x 12.4 cm Weight Meter 650 g Boxed 1800 g Ordering Information
Order No. Item ECPH270042GS Eutech pH 2700 Meter With pH Electrode (ECFG7370101B), ATC Probe (PH5TEMB01P), Integral Electrode Holder, 100/240 VAC Adapter, RS232 cable, & pH Electrode Refill Solution ECFC7960201B General purpose plastic-body double junction gel-filled ORP Electrode, 12x90mm, BNC connector, 1m cable length ECFC7960101B General purpose plastic-body single junction gel-filled ORP Electrode, 12x90mm, BNC connector, 1m cable length pH Calibration Solutions
Order No. Item ECBU1BT pH 1.68 buffer, 480 ml ECBU4BTC pH 4.01 buffer, 480 ml ECBU7BTC pH 7.00 buffer, 480 ml ECBU10BTC pH 10.01 buffer, 480 ml ECBU12BT pH 12.45 buffer, 480 ml EC-BU-6.86BT pH 6.86 buffer, 480 ml EC-BU-9.18BT pH 9.18 buffer, 480 ml ORP Calibration Solutions
Order No. Item ECORPQUIN Quinhydrone 263 mV, 480 ml ECORPQUIN086 Quinhydrone 86 mV, 480 ml Download Brochure
• Eutech 2700 Series Family Brochure -
- Up to 6-point calibration with auto-buffer recognition
- Non-volatile memory holds up to 500 data points-time and date-stamped for GLP compliance
- Cal-due alarm-no more out-dated calibrations
- Bi-directional RS232 for easy data transfer to computer
- Password protection for setup and calibration
Product Description
Product Specification Description pH Range -2.000 to 20.000 pH Resolution/Accuracy 0.1 / 0.01/ 0.001 pH (selectable)/ ± 0.002 pH + 1 LSD ORP Range ± 2000 mV Resolution/Accuracy 0.1 mV / ± 0.2 mV Temp.Range 0.0 to 100.0 ºC (32.0 to 212.0 ºF) Resolution/Accuracy 0.1 ºC (0.1 ºF) / ± 0.3 ºC / ± 0.5 ºF (0 to 70 ºC) ATC/MTC 0 to 100 ºC (pH only) Buffer Options USA, NIST, DIN, User 1, User 2, Custom No.of pH Calibration Points 6 points Built-in Electrode Arm Yes Memory 500 Data sets GLP Yes Input DC socket, BNC, 2.5 mm phono (ATC), phono (reference), phono (RS232) Output RS 232C (via cable) Printer – Electrode Included EC620131, glass body, combination pH electrode, open pore, gel filled, 12×120 mm, BNC connector, 1m cable length. ORP electrode to be ordered separately Temp.Probe Included PH5TEMB01P Power Requirements Included, 100 /240VAC SMPS Power Adapter, 9V,6W Dimensions (L x W x H) Meter 17.5 x 15.5 x 6.9 cm Boxed 30.8 x 23.5 x 12.4 cm Weight Meter 650 g Boxed 1800 g Ordering Information
Order No. Item ECPH27005E pH 2700 meter with glass body, open pore pH electrode EC620131, ATC Probe PH5TEMB01P, integral electrode holder , 100/240 VAC Adapter and RS232 cable ECFC7960201B General purpose plastic-body double junction gel-filled ORP Electrode, 12x90mm, BNC connector, 1m cable length ECFC7960101B General purpose plastic-body single junction gel-filled ORP Electrode, 12x90mm, BNC connector, 1m cable length pH Calibration Solutions
Order No. Item ECBU1BT pH 1.68 buffer, 480 ml ECBU4BTC pH 4.01 buffer, 480 ml ECBU7BTC pH 7.00 buffer, 480 ml ECBU10BTC pH 10.01 buffer, 480 ml ECBU12BT pH 12.45 buffer, 480 ml EC-BU-6.86BT pH 6.86 buffer, 480 ml EC-BU-9.18BT pH 9.18 buffer, 480 ml ORP Calibration Solutions
Order No. Item ECORPQUIN Quinhydrone 263 mV, 480 ml ECORPQUIN086 Quinhydrone 86 mV, 480 ml Download Brochure
• Eutech pH 70042GS ,pH 27005E ,pH 27005E-P Brochure -
- Large, comprehensive screen that displays readings, calibration points and electrode indicator
- Ready indicator alerts when readings are stable
- Up to 6 point push button calibration with auto-buffer recognition
- Non-volatile memory holds up to 100 data points
- Integral electrode holder
Product Description
Product Specification Description pH Range -2.000 to 20.000 pH Resolution/Accuracy 0.1 / 0.01/ 0.001 pH (selectable)/ ± 0.002 pH + 1 LSD ORP Range ± 2000 mV Resolution/Accuracy 0.1 mV / ± 0.2 mV Temp.Range 0.0 to 100.0ºC (32.0 to 212.0ºF) Resolution/Accuracy 0.1 ºC (0.1 ºF) / ± 0.3 ºC / ± 0.5 ºF (0 to 70 ºC) ATC/MTC 0 to 100 ºC (pH only) Buffer Options USA, NIST, DIN, User 1, User 2, Custom No.of pH Calibration Points 6 points Built-in Electrode Arm Yes Memory 500 data sets GLP Yes Input DC socket, BNC, 2.5 mm phono (ATC), phono (reference), phono (RS232) Output RS 232C (via cable) Printer Included AN-270 ,Brand Antech dot matrix printer Electrode Included EC620131, glass body, combination pH electrode, open pore, gel filled, 12×120 mm, BNC connector, 1m cable length. ORP electrode to be ordered separately Temp.Probe Included PH5TEMB01P Power Requirements Included, 100 /240VAC SMPS power adapter, 9V,6W Dimensions (L x W x H) Meter 17.5 x 15.5 x 6.9 cm Boxed 30.8 x 23.5 x 12.4 cm Weight Meter 650 g Boxed 1800 g Ordering Information
Order No. Item ECPH27005E-P pH 2700 meter with glass body, open pore pH electrode EC620131, ATC Probe PH5TEMB01P, integral electrode holder , 100/240 VAC Adapter, RS232 cable and AN-270 Dot Matrix Printer ECFC7960201B General purpose plastic-body double junction gel-filled ORP Electrode, 12x90mm, BNC connector, 1m cable length ECFC7960101B General purpose plastic-body single junction gel-filled ORP Electrode, 12x90mm, BNC connector, 1m cable length pH Calibration Solutions
Order No. Item ECBU1BT pH 1.68 buffer, 480 ml ECBU4BTC pH 4.01 buffer, 480 ml ECBU7BTC pH 7.00 buffer, 480 ml ECBU10BTC pH 10.01 buffer, 480 ml ECBU12BT pH 12.45 buffer, 480 ml EC-BU-6.86BT pH 6.86 buffer, 480 ml EC-BU-9.18BT pH 9.18 buffer, 480 ml ORP Calibration Solutions
Order No. Item ECORPQUIN Quinhydrone 263 mV, 480 ml ECORPQUIN086 Quinhydrone 86 mV, 480 ml Download Brochure
• Eutech pH 70042GS ,pH 27005E ,pH 27005E-P Brochure -
- Backlit, rugged waterproof meter is ideal for any environment
- Durable waterproof and dustproof design with IP67 rating
- Large, backlit display – View measurement with temperature and % slope
- Grip-Clip™ – Quickly and easily secures the pH electrode to your beaker or container
- Auto buffer recognition – Automatically identifies the correct pH buffer for rapid calibration
- Calibration due alarm – Set a visible reminder when it is time to recalibrate the meter
- Ready indicator, manual or automatic measurement hold feature and optional automatic shutoff function
- Intuitive, user-friendly icons – Electrode status displays pH slope
- Store up to 500 data sets – Easy USB or RS232 output with optional data cables
- Built-in real-time clock stamps stored data and calibration data with time and date – Meets standards for GLP (Good Laboratory Practices)
- Extended battery life from two AA batteries, or use optional universal power adapter
- Compatible with pH, ORP or ISE electrodes having a BNC connector
Product Description
Product Specification Description pH Range -2.00 to 16.00 pH Resolution / Accuracy 0.01 pH / ± 0.01 pH pH Calibration Points Up to 5 points (USA & NIST & CUSTOM) Up to 6 points (DIN) mV Range ± 2000 mV Resolution / Accuracy 0.1 mV ± 999.9 mV; 1 mV beyond/±0.2 mV + 2 LSD or + 0.5 % of reading; whichever is greater mV Calibration Points ± 200 mV Ion Range 0.0 to 2000 ppm Resolution / Accuracy 0.01 / 0.1 / 1 ppm / ± 0.5 % full scale (monovalent); ±1 % full scale (divalent) Ion Calibration Points From 2-4 or 2-5 points: 0.10, 1.00, 10.0, 100.0 & 1000 /0.20, 2.00, 20.0, 200.0 & 2000 / 0.50, 5.00, 50.0 & 500.0 Temperature Range -10.0 to 110.0 ºC (14.0 to 230.0 ºF) Resolution / Accuracy 0.1 ºC/ ºF / ± 0.5 ºC; ± 0.9 ºF Temperature Calibration Points Offset in 0.1 increments, ± 10 ºC or ± 18 ºF Display Three line custom LCD Temperature Compensation Automatic or manual from -10 to 110 ºC Memory Stores up to 500 data sets Power Two AA batteries (included), >500 hours (without backlight), AC adapter (optional) Output USB or RS232 Real-Time Clock Time and date stamp on calibration and stored data Standard supply Meter Kit with double-junction pH electrode ECFC7252201B and ATC probe, Grip-Clip™, two AA batteries, hard carry case, USB cable, pH buffers, storage solution ,rinse solution Dimensions (L x W x H) Meter 77/8” x 31/8” x 21/4” (20 x 8.3 x 5.7 cm) Boxed 91/8” x 91/8” x 23/4” (23 x 23 x 7 cm) Weight Meter 1 lb (0.5 kg) Boxed 1.4 lb (0.7 kg) Ordering Information
Order No. Item ECPHWP45002K pH 450 meter Kit with double-junction pH electrode ECFC7252201B and ATC probe, Grip-Clip™, two AA batteries, hard carry case, USB cable, pH buffers, storage solution, rinse solution 60X426401 Optional 100 / 240 VAC SMPS power adapter, 9 V, 6 W ECFC7960201B General purpose plastic-body double junction gel-filled ORP Electrode, 12x90mm, BNC connector, 1m cable length ECFC7960101B General purpose plastic-body single junction gel-filled ORP Electrode, 12x90mm, BNC connector, 1m cable length pH Calibration Solutions
Order No. Item ECBU1BT pH 1.68 buffer, 480 ml ECBU4BTC pH 4.01 buffer, 480 ml ECBU7BTC pH 7.00 buffer, 480 ml ECBU10BTC pH 10.01 buffer, 480 ml ECBU12BT pH 12.45 buffer, 480 ml EC-BU-6.86BT pH 6.86 buffer, 480 ml EC-BU-9.18BT pH 9.18 buffer, 480 ml ORP Calibration Solutions
Order No. Item ECORPQUIN Quinhydrone 263 mV, 480 ml ECORPQUIN086 Quinhydrone 86 mV, 480 ml Download Brochure
• Eutech 150 & 450 Series Family Brochure -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic) -
Product Description
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample The selection of a suitable electrode depends on the types of application Eutech’s pH /ORP combination electrodes offer the convenience of having the reference and measuring electrodes combined in a single housing. They are offered in a variety of configurations to suit most laboratory and field application needs. Choose from two models: single-or double-junction, sealed (gel-filled) or refillableSingle Junction
Ideal for general-purpose applications. Ag+ ions are in contact with junction and this can cause chemical interaction with sulphur. Not suitable for biological samples or tris buffersDouble Junction
Prevents interference between the inner fill solution and sample. Electrolyte is free of Ag+ ions. Suitable for use with biological samples. Can be used in place of calomel reference electrodesSealed(gel-filled)
No refill hole. The reference electrolyte is usually a gel. Replacement of the electrode is necessary when it gets contaminated. Virtually no maintenance is requiredRefillable
Refill hole allows reference electrolyte replenishment. Can be used many times over. Needs refilling when fill solution is low Choose single junction ORP electrodes for field, clean water, and other general-purpose applications or double junction electrodes for samples containing heavy metals and organics. Platinum sensors are suitable for most general uses pH Electrodes (General Glass) & (General Plastic)
Phone: +91-9812406797|info@astechno.co.in
